1, flat layer accurate spend

Elevator car docking station, the car sill deviation between the plane and the door sill on the plane perpendicular to the direction of the value.

2, rated speed of the elevator

The provisions of design of elevator car speed car.

3, maintenance speed

Elevator maintenance running speed.

4, rated load

The maximum load specified elevator design in the car.

5, lift height

The vertical distance between the floor to the top from the bottom end station end station building.

6, room

Special room install one or more of the traction machine and ancillary equipment.

6.1 room height

The minimum vertical distance between the room ground to the roof of the room.

6.2 room width

Room along the width direction parallel to the horizontal distance of car.

6.3 room width

The width of the room is perpendicular to the horizontal distance room.

6.4 room area

The width and depth of the product room.

7, auxiliary room; interlayer; pulley interval

Room above the shaft, the shaft top between the floor and room room. It has the function of compartment, can also be installed pulley, speed limiter and electrical equipment.

8, layer platform ticket

Each floor of for access to car place.

9, layer station entrance

In wells and avoid the opening on the part of it from the station to the car a layer between the channel.

10, base station

Stop car without running the command station. Generally located in the lobby or the bottom end of the largest passenger station.

11, scheduled base station

Parallel or group control elevator operation instructions, designated stop running standby station.

12, the bottom end of the station

Lowest car stop.

13, the top end station

Highest car stop.

14, the distance between layers

Layer between two adjacent docked station door sill distance.

15, well way

Passenger elevator car and to reload or (and) hydraulic cylinder piston movement space. This space is bounded by the bottom of the bottom of the well bottom pit and the top of the well.